Jun-2022 CompTIA PD1-001 Certification Real 2022 Mock Exam [Q123-Q143]

NO.123 Which of the following is the function of a relay?

Converts DC voltage to AC voltage

Lessens the voltage in a circuit

Acts as an electronic switch

Acts as a temperature sensor

NO.124 Which of the following items are needed for the scan-to-folder function? (Select TWO).

SMTP server address

UNC path

SMTP Authentication information

LDAP IP address

Correct permission levels

NO.125 Which of the following is used to remove the airborne byproduct caused by the charging of the photoconductor?

Fan

Toner filter

Ozone filter

Noise filter

NO.126 A technician has completed the service call and is ready to leave; however, the client is not around. Which of the following is the BEST response?

Leave a note on the unit saying everything is done. Tell someone else that the work is completed.

Walk around the office looking for them and do not leave until you find them.

Ask someone to page or call them to advise that the call is complete and give any feedback required.

Leave the office, the work is done. If there is something else they will place another service call.

NO.127 Which of the fol owing would be the MOST suitable method of printing for a small office with four workstations and one MFD?

Network with a print driver loaded on each workstation.

Connect via a serial cable through a hub to the print device.

Connect via a parallel cable through a hub out to each workstation.

Use only one workstation for printing to avoid confusion.

NO.128 An image color consortium (ICC) profile is used for:

print server configuration.

a user account.

creation of a color PDF file.

color management.

NO.129 Which of the following performs a similar function to a charge coupled device (CCD)?

Scan using the PDF format and then edit the text.

CIS

DAC

LED

LCD

NO.130 When using a fax machine a technician does not get a dial tone, which of the following could be the problem? (Select TWO).

Noise on the line

Communication speed is set incorrectly

Call waiting is turned on

Phone line is not plugged in

Faulty Modem

NO.131 Which of the following would be the corresponding subtractive colors to the additive primary colors?

Magenta, Yellow and Black

Purple, Black and Red

Cyan, Magenta and Yellow

Orange, Cyan and Blue

NO.132 A photo-reflective sensor typically detects:

velocity.

paper presence.

fuser temperature.

inertia.

NO.133 The transfer belt or transfer roller is supplied by which of the fol owing?

USB

HVPS

SCSI

LVPS

NO.134 A technician is onsite performing preventative maintenance on a color copier. The technician remembers that they need to make an important personal phone call and their cell phone does not have coverage in this area. Which of the following would be BEST to handle this situation?

Without bothering the client go to a phone in a private area and make the call, try and keep the call as brief as possible.

Stop the preventative maintenance and drive to an area with cell phone coverage.

Explain the situation and ask the client if you could use a phone to make the call.

At a good stopping point leave the site and go back to your office to make the call, return to the job as soon as possible.

NO.135 When a technician needs to troubleshoot a powered laser unit, which of the fol owing safety guidelines must they adhere to?

Remove all jewelry and do not place any reflective objects in the laser path.

Securely tape open the laser shutter and remove the photoconductor unit.

Remove all safety door switches from the laser unit.

Remove all jewelry and remove the photoconductor.

NO.136 Which of the following is the MOST likely symptom if the white reference plate on a scanning device is dirty in one area?

Registration error

Paper Jam

Skewed Image

Streak

NO.137 Which of the following electrical components converts AC source voltages to various DC voltages?

CCD

LVPS

PRCB

HVPS

NO.138 Which of the following is the main function of the developer unit metering blade?

To ensure toner and developer are evenly mixed.

To prevent the toner from escaping from the developer unit.

To provide an even layer of developer.

To remove dust and debris from the toner.

NO.139 Which of the following components would be used to move a diverter gate on MOST machines?

Solenoid

Capacitor

AC motor

Relay

NO.140 Which of the following components can be found in the ADF unit on a multifunctional device?

Heat lamp

Pressure roller

Separation pad

Thermal Fuse

NO.141 Which of the following should a technicians FIRST step be if a received fax has dark background?

Check the media in the local machine.

Test the telephone line quality.

Produce a test print on the local machine.

Check the operation of the remote machine.

NO.142 Which of the following items would be used to transfer rotation from one pul ey to another?

Belt

Bushing

Spring

Gear

NO.143 In order for a color scanning device to be able to capture the colors of an original document, which of the following items must be incorporated into the scanners technology?

CMYK color digital processor

RGB/CMYK color scanning lamp

CMYK analog processor

RGB color CCD filters

Leave a Reply Cancel reply

PD1-001 Practice Tests

Related Certifications

Recent Posts

Categories

Archives