Pass Google Professional-Cloud-Network-Engineer Exam Info and Free Practice Test [Q35-Q58]

admin October 8, 2022 0 Comments

Rate this post

Pass Google Professional-Cloud-Network-Engineer Exam Info and Free Practice Test

New 2022 Latest Questions Professional-Cloud-Network-Engineer Dumps – Use Updated Google Exam

How to book Google Professional Cloud Network Engineer Exams

The registration for the Google Professional Cloud Network Engineer Exam follows the steps given below.

Step 1: Visit the Google Cloud Webassessor Website
Step 2: Sign in or sign up to your Google Cloud Webassessor account
Step 3: Search for the exam name Google Professional Cloud Network Engineer
Step 4: Take the date of the exam, choose exam center and make further payment using payment method like credit/debit etc.

What is the duration, language, and format of Google Professional Cloud Network Engineer Exam

Passing score: 80%
Length of Examination: 120 minutes
Recommended experience: 3+ years of industry experience including 1+ years designing and managing solutions using GCP.
Number of Questions: 50-60

NEW QUESTION 35
You decide to set up Cloud NAT. After completing the configuration, you find that one of your instances is not using the Cloud NAT for outbound NAT.
What is the most likely cause of this problem?

The instance has been configured with multiple interfaces.

An external IP address has been configured on the instance.

You have created static routes that use RFC1918 ranges.

The instance is accessible by a load balancer external IP address.

NEW QUESTION 36
You have a web application that is currently hosted in the us-central1 region. Users experience high latency when traveling in Asia. You’ve configured a network load balancer, but users have not experienced a performance improvement. You want to decrease the latency.
What should you do?

Configure a policy-based route rule to prioritize the traffic.

Configure an HTTP load balancer, and direct the traffic to it.

Configure Dynamic Routing for the subnet hosting the application.

Configure the TTL for the DNS zone to decrease the time between updates.

NEW QUESTION 37
Your company has recently expanded their EMEA-based operations into APAC. Globally distributed users report that their SMTP and IMAP services are slow. Your company requires end-to-end encryption, but you do not have access to the SSL certificates.
Which Google Cloud load balancer should you use?

SSL proxy load balancer

Network load balancer

HTTPS load balancer

TCP proxy load balancer

NEW QUESTION 38
You created a VPC network named Retail in auto mode. You want to create a VPC network named Distribution and peer it with the Retail VPC.
How should you configure the Distribution VPC?

Create the Distribution VPC in auto mode. Peer both the VPCs via network peering.

Create the Distribution VPC in custom mode. Use the CIDR range 10.0.0.0/9. Create the necessary subnets, and then peer them via network peering.

Create the Distribution VPC in custom mode. Use the CIDR range 10.128.0.0/9. Create the necessary subnets, and then peer them via network peering.

Rename the default VPC as “Distribution” and peer it via network peering.

NEW QUESTION 39
You have an application running on Compute Engine that uses BigQuery to generate some results that are stored in Cloud Storage. You want to ensure that none of the application instances have external IP addresses.
Which two methods can you use to accomplish this? (Choose two.)

Enable Private Google Access on all the subnets.

Enable Private Google Access on the VPC.

Enable Private Services Access on the VPC.

Create network peering between your VPC and BigQuery.

Create a Cloud NAT, and route the application traffic via NAT gateway.

NEW QUESTION 40
You are migrating to Cloud DNS and want to import your BIND zone file.
Which command should you use?

gcloud dns record-sets import ZONE_FILE –zone MANAGED_ZONE

gcloud dns record-sets import ZONE_FILE –replace-origin-ns –zone MANAGED_ZONE

gcloud dns record-sets import ZONE_FILE –zone-file-format –zone MANAGED_ZONE

gcloud dns record-sets import ZONE_FILE –delete-all-existing –zone MANAGED ZONE

NEW QUESTION 41
You are creating an instance group and need to create a new health check for HTTP(s) load balancing.
Which two methods can you use to accomplish this? (Choose two.)

Create a new health check using the gcloud command line tool.

Create a new health check using the VPC Network section in the GCP Console.

Create a new health check, or select an existing one, when you complete the load balancer’s backend configuration in the GCP Console.

Create a new legacy health check using the gcloud command line tool.

Create a new legacy health check using the Health checks section in the GCP Console.

NEW QUESTION 42
You need to configure a static route to an on-premises resource behind a Cloud VPN gateway that is configured for policy-based routing using the gcloud command.
Which next hop should you choose?

The default internet gateway

The IP address of the Cloud VPN gateway

The name and region of the Cloud VPN tunnel

The IP address of the instance on the remote side of the VPN tunnel

NEW QUESTION 43
You want to create a service in GCP using IPv6.
What should you do?

Create the instance with the designated IPv6 address.

Configure a TCP Proxy with the designated IPv6 address.

Configure a global load balancer with the designated IPv6 address.

Configure an internal load balancer with the designated IPv6 address.

NEW QUESTION 44
You create multiple Compute Engine virtual machine instances to be used at TFTP servers.
Which type of load balancer should you use?

HTTP(S) load balancer

SSL proxy load balancer

TCP proxy load balancer

Network load balancer

NEW QUESTION 45
You want to establish a dedicated connection to Google that can access Cloud SQL via a public IP address and that does not require a third-party service provider.
Which connection type should you choose?

Carrier Peering

Direct Peering

Dedicated Interconnect

Partner Interconnect

NEW QUESTION 46
You need to create a new VPC network that allows instances to have IP addresses in both the 10.1.1.0/24 network and the 172.16.45.0/24 network.
What should you do?

Configure global load balancing to point 172.16.45.0/24 to the correct instance.

Create unique DNS records for each service that sends traffic to the desired IP address.

Configure an alias-IP range of 172.16.45.0/24 on the virtual instances within the VPC subnet of 10.1.1.0/24.

Use VPC peering to allow traffic to route between the 10.1.0.0/24 network and the 172.16.45.0/24 network.

NEW QUESTION 47
Your company’s Google Cloud-deployed, streaming application supports multiple languages. The application development team has asked you how they should support splitting audio and video traffic to different backend Google Cloud storage buckets. They want to use URL maps and minimize operational overhead. They are currently using the following directory structure:
/fr/video
/en/video
/es/video
/../video
/fr/audio
/en/audio
/es/audio
/../audio
Which solution should you recommend?

Rearrange the directory structure, create a URL map and leverage a path rule such as /video/* and /audio/
*.

Rearrange the directory structure, create DNS hostname entries for video and audio and leverage a path rule such as /video/* and /audio/*.

Leave the directory structure as-is, create a URL map and leverage a path rule such as /[a-z]{2}/video and
/[a-z]{2}/audio.

Leave the directory structure as-is, create a URL map and leverage a path rule such as /*/video and /*/ audio.

NEW QUESTION 48
You need to create a GKE cluster in an existing VPC that is accessible from on-premises. You must meet the following requirements:
* IP ranges for pods and services must be as small as possible.
* The nodes and the master must not be reachable from the internet.
* You must be able to use kubectl commands from on-premises subnets to manage the cluster.
How should you create the GKE cluster?

* Create a private cluster that uses VPC advanced routes.
* Set the pod and service ranges as /24.
* Set up a network proxy to access the master.

* Create a VPC-native GKE cluster using GKE-managed IP ranges.
* Set the pod IP range as /21 and service IP range as /24.
* Set up a network proxy to access the master.

* Create a VPC-native GKE cluster using user-managed IP ranges.
* Enable a GKE cluster network policy, set the pod and service ranges as /24.
* Set up a network proxy to access the master.
* Enable master authorized networks.

* Create a VPC-native GKE cluster using user-managed IP ranges.
* Enable privateEndpoint on the cluster master.
* Set the pod and service ranges as /24.
* Set up a network proxy to access the master.
* Enable master authorized networks.

NEW QUESTION 49
You have configured a Compute Engine virtual machine instance as a NAT gateway. You execute the following command:
gcloud compute routes create no-ip-internet-route
–network custom-network1
–destination-range 0.0.0.0/0
–next-hop instance nat-gateway
–next-hop instance-zone us-central1-a
–tags no-ip –priority 800
You want existing instances to use the new NAT gateway. Which command should you execute?

sudo sysctl -w net.ipv4.ip_forward=1

gcloud compute instances add-tags [existing-instance] –tags no-ip

gcloud builds submit –config=cloudbuild.waml –substitutions=TAG_NAME=no-ip

gcloud compute instances create example-instance –network custom-network1
–subnet subnet-us-central
–no-address
–zone us-central1-a
–image-family debian-9
–image-project debian-cloud
–tags no-ip

NEW QUESTION 50
You have configured a Compute Engine virtual machine instance as a NAT gateway. You execute the following command:
gcloud compute routes create no-ip-internet-route
–network custom-network1
–destination-range 0.0.0.0/0
–next-hop instance nat-gateway
–next-hop instance-zone us-central1-a
–tags no-ip –priority 800
You want existing instances to use the new NAT gateway. Which command should you execute?

sudo sysctl -w net.ipv4.ip_forward=1

gcloud compute instances add-tags [existing-instance] –tags no-ip

gcloud builds submit –config=cloudbuild.waml –substitutions=TAG_NAME=no-ip

NEW QUESTION 51
You have ordered Dedicated Interconnect in the GCP Console and need to give the Letter of Authorization/Connecting Facility Assignment (LOA-CFA) to your cross-connect provider to complete the physical connection.
Which two actions can accomplish this? (Choose two.)

Open a Cloud Support ticket under the Cloud Interconnect category.

Download the LOA-CFA from the Hybrid Connectivity section of the GCP Console.

Run gcloud compute interconnects describe <interconnect>.

Check the email for the account of the NOC contact that you specified during the ordering process.

Contact your cross-connect provider and inform them that Google automatically sent the LOA/CFA to them via email, and to complete the connection.

NEW QUESTION 52
Your company’s web server administrator is migrating on-premises backend servers for an application to GCP. Libraries and configurations differ significantly across these backend servers. The migration to GCP will be lift-and-shift, and all requests to the servers will be served by a single network load balancer frontend. You want to use a GCP-native solution when possible.
How should you deploy this service in GCP?

Create a managed instance group from one of the images of the on-premises servers, and link this instance group to a target pool behind your load balancer.

Create a target pool, add all backend instances to this target pool, and deploy the target pool behind your load balancer.

Deploy a third-party virtual appliance as frontend to these servers that will accommodate the significant differences between these backend servers.

Use GCP’s ECMP capability to load-balance traffic to the backend servers by installing multiple equal-priority static routes to the backend servers.

NEW QUESTION 53
Your company offers a popular gaming service. Your instances are deployed with private IP addresses, and external access is granted through a global load balancer. You believe you have identified a potential malicious actor, but aren’t certain you have the correct client IP address. You want to identify this actor while minimizing disruption to your legitimate users.
What should you do?

Create a Cloud Armor Policy rule that denies traffic and review necessary logs.

Create a Cloud Armor Policy rule that denies traffic, enable preview mode, and review necessary logs.

Create a VPC Firewall rule that denies traffic, enable logging and set enforcement to disabled, and review necessary logs.

Create a VPC Firewall rule that denies traffic, enable logging and set enforcement to enabled, and review necessary logs.

NEW QUESTION 54
After a network change window one of your company’s applications stops working. The application uses an on-premises database server that no longer receives any traffic from the application. The database server IP address is 10.2.1.25. You examine the change request, and the only change is that 3 additional VPC subnets were created. The new VPC subnets created are 10.1.0.0/16, 10.2.0.0/16, and 10.3.1.0/24/ The on-premises router is advertising 10.0.0.0/8.
What is the most likely cause of this problem?

The more specific VPC subnet route is taking priority.

The less specific VPC subnet route is taking priority.

A cloud firewall rule that blocks traffic to the on-premises database server was created during the change.

The on-premises router is not advertising a route for the database server.

NEW QUESTION 55
You have a storage bucket that contains two objects. Cloud CDN is enabled on the bucket, and both objects have been successfully cached. Now you want to make sure that one of the two objects will not be cached anymore, and will always be served to the internet directly from the origin.
What should you do?

Ensure that the object you don’t want to be cached anymore is not shared publicly.

Create a new storage bucket, and move the object you don’t want to be checked anymore inside it. Then edit the bucket setting and enable the private attribute.

Add an appropriate lifecycle rule on the storage bucket containing the two objects.

Add a Cache-Control entry with value private to the metadata of the object you don’t want to be cached anymore. Invalidate all the previously cached copies.

NEW QUESTION 56
You created a new VPC for your development team. You want to allow access to the resources in this VPC via SSH only.
How should you configure your firewall rules?

Create two firewall rules: one to block all traffic with priority 0, and another to allow port 22 with priority 1000.

Create two firewall rules: one to block all traffic with priority 65536, and another to allow port 3389 with priority 1000.

Create a single firewall rule to allow port 22 with priority 1000.

Create a single firewall rule to allow port 3389 with priority 1000.

NEW QUESTION 57
You have a web application that is currently hosted in the us-central1 region. Users experience high latency when traveling in Asia. You’ve configured a network load balancer, but users have not experienced a performance improvement. You want to decrease the latency.
What should you do?

Configure a policy-based route rule to prioritize the traffic.

Configure an HTTP load balancer, and direct the traffic to it.

Configure Dynamic Routing for the subnet hosting the application.

Configure the TTL for the DNS zone to decrease the time between updates.

NEW QUESTION 58
You need to restrict access to your Google Cloud load-balanced application so that only specific IP addresses can connect.
What should you do?

Create a secure perimeter using the Access Context Manager feature of VPC Service Controls and restrict access to the source IP range of the allowed clients and Google health check IP ranges.

Create a secure perimeter using VPC Service Controls, and mark the load balancer as a service restricted to the source IP range of the allowed clients and Google health check IP ranges.

Tag the backend instances “application,” and create a firewall rule with target tag “application” and the source IP range of the allowed clients and Google health check IP ranges.

Label the backend instances “application,” and create a firewall rule with the target label “application” and the source IP range of the allowed clients and Google health check IP ranges.

Latest Professional-Cloud-Network-Engineer Exam Dumps Google Exam: https://www.vcedumps.com/Professional-Cloud-Network-Engineer-examcollection.html

Tags: new Professional-Cloud-Network-Engineer test questions vce, Professional-Cloud-Network-Engineer learning mode, Professional-Cloud-Network-Engineer reliable test braindumps, Professional-Cloud-Network-Engineer reliable test forum