[Q21-Q44] Best Quality 300-425 Exam Questions Cisco Test To Gain Brilliante Result!

0 Comments

Rate this post

Best Quality 300-425 Exam Questions Cisco Test To Gain Brilliante Result!

Preparations of 300-425 Exam 2023 CCNP Enterprise Unlimited 113 Questions

NO.21 During a wireless network design a customer requires wireless coverage on the perimeter of a building But also wants to minimize signal leakage from the wireless network Which antenna should be used to accomplish this design?

 
 
 
 

NO.22 An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?

 
 
 
 

NO.23 An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with -67 dBm signal level for optimal VoWLAN design?

 
 
 
 

NO.24 An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?

 
 
 
 

NO.25 Refer to the exhibit.

Which two statements about Cisco Prime Infrastructure are true? (Choose two.)

 
 
 
 
 

NO.26 A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?

 
 
 
 

NO.27 An engineer has successfully configured high availability and SSO using two Cisco 5508 Wireless LAN Controllers. The engineer can access the Active Primary WLC, but the Secondary Standby WLC is not accessible. Which two methods allow access to the standby unit? (Choose two.)

 
 
 
 
 

NO.28 An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?

 
 
 
 

NO.29 An engineer is designing a new wireless network. The network needs to meet these requirements:

Which design approach should be taken?

 
 
 
 

NO.30

 
 
 
 
 

NO.31 A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?

 
 
 
 

NO.32 What is the Ethernet frame size for 802.1Q?

 
 
 
 

NO.33 Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?

 
 
 
 

NO.34 Prior to enabling PPPoE in a virtual private dialup network group, which task must be completed?

 
 
 
 

NO.35 A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gam antennas tor industrial, maintenance, or storage areas When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs Which strategy will reduce the negative impact of the design?

 
 
 
 

NO.36 An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer select?

 
 
 
 

NO.37 A customer asks an engineer to explain the concept of mobility domains and mobility groups. Which statement does the engineer respond with?

 
 
 
 

NO.38 A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?

 
 
 
 

NO.39 An engineer must create data link redundancy for the company’s Cisco Wireless LAN controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)

 
 
 
 
 
 

NO.40 A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)

 
 
 
 
 

NO.41 During a wireless network design, a customer requires wireless coverage on the perimeter of a building but also wants to minimize signal leakage from the wireless network. Which antenna should be used to accomplish this design?

 
 
 
 

NO.42

Refer to the exhibit. A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client roaming behavior?

 
 
 
 

NO.43 An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?

 
 
 
 

NO.44 A network engineer is troubleshooting connectivity issues between two WLCs running 8.x code in SSO mode and finds that the redundancy management heartbeat is failing. Which packet type must be filtered for heartbeats when taking a capture to verify communication?

 
 
 
 

The Cisco 300-425 exam, also known as Designing Cisco Enterprise Wireless Networks, is one of the most sought-after certifications for IT professionals in the field of wireless networking. This exam is designed to test the candidates’ knowledge and skills in designing and implementing complex wireless networks for enterprises. It is a professional-level exam that is ideal for network engineers, designers, and administrators who are responsible for planning, designing, and deploying enterprise wireless networks.

The Cisco 300-425 (Designing Cisco Enterprise Wireless Networks) certification exam is designed for individuals who are interested in pursuing a career in the wireless networking industry. This certification exam is a part of the CCNP Enterprise certification track and is aimed at validating the knowledge and skills required to design, deploy, and manage advanced wireless networks using Cisco technologies.

 

Focus on 300-425 All-in-One Exam Guide For Quick Preparation: https://www.vcedumps.com/300-425-examcollection.html


Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below