156-315.81 PDF Dumps Real 2023 Recently Updated Questions [Q337-Q357]

admin September 22, 2023 0 Comments

Rate this post

156-315.81 PDF Dumps Real 2023 Recently Updated Questions

Released CheckPoint 156-315.81 Updated Questions PDF

The CheckPoint 156-315.81 exam is designed to test the candidate’s ability to design, implement, and manage complex security solutions using Check Point’s security products. It is aimed at professionals who have already gained experience working with Check Point products and want to take their skills to the next level. 156-315.81 exam is designed to be challenging and requires a deep understanding of the technology and concepts covered.

Q337. Which of the following Check Point processes within the Security Management Server is responsible for the receiving of log records from Security Gateway?

logd

fwd

fwm

cpd

Q338. What is the benefit of “tw monitor” over “tcpdump”?

“fw monitor” reveals Layer 2 information, while “tcpdump” acts at Layer 3.

“fw monitor” is also available for 64-Bit operating systems.

With “fw monitor”, you can see the inspection points, which cannot be seen in “tcpdump”

“fw monitor” can be used from the CLI of the Management Server to collect information from multiple gateways.

Q339. Bob has finished io setup provisioning a secondary security management server. Now he wants to check if the provisioning has been correct. Which of the following Check Point command can be used to check if the security management server has been installed as a primary or a secondary security management server?

cpprod_util MgmtlsPrimary

cpprod_util FwlsSecondary

cpprod_util MgmtlsSecondary

cpprod_util FwlsPrimary

Q340. With Mobile Access enabled, administrators select the web-based and native applications that can be accessed by remote users and define the actions that users can perform the applications. Mobile Access encrypts all traffic using:

HTTPS for web-based applications and 3DES or RC4 algorithm for native applications. For end users to access the native applications, they need to install the SSL Network Extender.

HTTPS for web-based applications and AES or RSA algorithm for native applications. For end users to access the native application, they need to install the SSL Network Extender.

HTTPS for web-based applications and 3DES or RC4 algorithm for native applications. For end users to access the native applications, no additional software is required.

HTTPS for web-based applications and AES or RSA algorithm for native applications. For end users to access the native application, no additional software is required.

Q341. Which is the command to identify the NIC dnver before considering about the employment of the Multi-Queue feature?

show interface eth0 mq

ethtool A eth0

ifconfig -i eth0 verbose

ip show Int eth0

Q342. When performing a minimal effort upgrade, what will happen to the network traffic?

All connections that were initiated before the upgrade will be dropped, causing network downtime

All connections that were initiated before the upgrade will be handled normally

All connections that were initiated before the upgrade will be handled by the standby gateway

All connections that were initiated before the upgrade will be handled by the active gateway

Q343. What SmartEvent component creates events?

Consolidation Policy

Correlation Unit

SmartEvent Policy

SmartEvent GUI

Q344. What can we infer about the recent changes made to the Rule Base?

Rule 7 was created by the ‘admin’ administrator in the current session

8 changes have been made by administrators since the last policy installation

The rules 1, 5 and 6 cannot be edited by the ‘admin’ administrator

Rule 1 and object webserver are locked by another administrator

Q345. Which command will reset the kernel debug options to default settings?

fw ctl dbg -a 0

fw ctl dbg resetall

fw ctl debug 0

fw ctl debug set 0

Q346. Why would an administrator see the message below?

A new Policy Package created on both the Management and Gateway will be deleted and must be backed up first before proceeding.

A new Policy Package created on the Management is going to be installed to the existing Gateway.

A new Policy Package created on the Gateway is going to be installed on the existing Management.

A new Policy Package created on the Gateway and transferred to the Management will be overwritten by the Policy Package currently on the Gateway but can be restored from a periodic backup on the Gateway.

Q347. What is UserCheck?

Messaging tool used to verify a user’s credentials.

Communication tool used to inform a user about a website or application they are trying to access.

Administrator tool used to monitor users on their network.

Communication tool used to notify an administrator when a new user is created.

Q348. Which of the following is NOT an alert option?

SNMP

High alert

Mail

User defined alert

Q349. What are the different command sources that allow you to communicate with the API server?

SmartView Monitor, API_cli Tool, Gaia CLI, Web Services

SmartConsole GUI Console, mgmt_cli Tool, Gaia CLI, Web Services

SmartConsole GUI Console, API_cli Tool, Gaia CLI, Web Services

API_cli Tool, Gaia CLI, Web Services

Q350. In the Check Point Security Management Architecture, which component(s) can store logs?

SmartConsole

Security Management Server and Security Gateway

Security Management Server

SmartConsole and Security Management Server

Q351. Due to high CPU workload on the Security Gateway, the security administrator decided to purchase a new multicore CPU to replace the existing single core CPU. After installation, is the administrator required to perform any additional tasks?

After upgrading the hardware, increase the number of kernel instances using cpconfig

Hyperthreading must be enabled in the bios to use CoreXL

Run cprestart from dish

Administrator does not need to perform any task. Check Point will make use of the newly installed CPU and Cores.

https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_PerformanceTuning_AdminGuide/Content/Topics-PTG/CoreXL-Configuring-IPv4-and-IPv6-CoreXL-FW-instances.htm?Highlight=Configuring%20the%20Number%20of%20IPv4%20CoreXL%20Firewall%20Instances R81 https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_PerformanceTuning_AdminGuide/Topics-PTG/CoreXL-Configuring-IPv4-and-IPv6-CoreXL-FW-instances.htm cpconfig -> Enter the number of the Check Point CoreXL option. ( Enter 1 to select Change the number of firewall instances. OR Enter 2 for the option Change the number of IPv6 firewall instances.) -> Enter the total number of IPv4 (IPv6) CoreXL Firewall instances you wish the Security Gateway to run. Follow the instructions on the screen. -> Exit from the cpconfig menu. – Reboot the Security Gateway.

Q352. Which one is not a valid Package Option In the Web GUI for CPUSE?

Clean Install

Export Package

Database Conversion to R81.10 only

Upgrade

Q353. Matt wants to upgrade his old Security Management server to R81.x using the Advanced Upgrade with Database Migration. What is one of the requirements for a successful upgrade?

Size of the /var/log folder of the source machine must be at least 25% of the size of the /var/log directory on the target machine

Size of the /var/log folder of the target machine must be at least 25% of the size of the /var/log directory on the source machine

Size of the $FWDIR/log folder of the target machine must be at least 30% of the size of the $FWDIR/log directory on the source machine

Size of the /var/log folder of the target machine must be at least 25GB or more

https://sc1.checkpoint.com/documents/R77/CP_R77_Gaia_Installation_and_Upgrade_Guide/ html_frameset.htm?topic=documents/R77/CP_R77_Gaia_Installation_and_Upgrade_Guide/90083

Q354. You have created a rule at the top of your Rule Base to permit Guest Wireless access to the Internet. However, when guest users attempt to reach the Internet, they are not seeing the splash page to accept your Terms of Service, and cannot access the Internet. How can you fix this?

Right click Accept in the rule, select “More”, and then check ‘Enable Identity Captive Portal’.

On the firewall object, Legacy Authentication screen, check ‘Enable Identity Captive Portal’.

In the Captive Portal screen of Global Properties, check ‘Enable Identity Captive Portal’.

On the Security Management Server object, check the box ‘Identity Logging’.

Q355. When Identity Awareness is enabled, which identity source(s) is(are) used for Application Control?

RADIUS

Remote Access and RADIUS

AD Query

AD Query and Browser-based Authentication

Identity Awareness gets identities from these acquisition sources:

Q356. In order for changes made to policy to be enforced by a Security Gateway, what action must an administrator perform?

Publish changes

Save changes

Install policy

Install database

Q357. Fill in the blank: A ________ VPN deployment is used to provide remote users with secure access to internal corporate resources by authenticating the user through an internet browser.

Clientless remote access

Clientless direct access

Client-based remote access

Direct access

Loading …

CheckPoint 156-315.81 exam is designed to validate the expertise of security professionals in deploying, configuring, and managing Check Point Security solutions. Check Point Certified Security Expert R81 certification is a must-have for anyone looking to advance their career in the cybersecurity industry. 156-315.81 exam covers various topics, including advanced firewall features, VPNs, security management, and troubleshooting techniques.

156-315.81 Dumps and Practice Test (564 Exam Questions): https://www.vcedumps.com/156-315.81-examcollection.html

Tags: 156-315.81 guaranteed questions answers, 156-315.81 latest test objectives pdf, 156-315.81 online version, 156-315.81 reliable exam collection materials, 156-315.81 reliable exam practice, 156-315.81 reliable free study guide, 156-315.81 valid exam tips, 156-315.81 vce files

156-315.81 PDF Dumps Real 2023 Recently Updated Questions [Q337-Q357]

Leave a Reply Cancel reply

156-315.81 Practice Tests

Related Certifications

Recent Posts

Categories

Archives