Latest NSE8_812 Pass Guaranteed Exam Dumps with Accurate & Updated Questions [Q27-Q51]

admin December 6, 2023 0 Comments

Rate this post

Latest NSE8_812 Pass Guaranteed Exam Dumps with Accurate & Updated Questions

NSE8_812 Exam Brain Dumps – Study Notes and Theory

Fortinet NSE8_812 certification exam is intended for individuals who want to demonstrate their expertise in Fortinet security solutions and become a certified Fortinet Network Security Expert (NSE). Fortinet NSE 8 – Written Exam (NSE8_812) certification validates the skills and knowledge required to design, implement and manage advanced security solutions using Fortinet’s security products.

NEW QUESTION 27
Refer to the exhibits.

A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer’s requirements?

1x FortiSwitch 248EFPOE

2x FortiSwitch 224E-POE

2x FortiSwitch 248E-FPOE

2x FortiSwitch 124E-FPOE

The customer wants to deploy 12 FortiAP 431F devices on a high density conference center, but they do not have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy. PoE switches are switches that can provide both data and power to connected devices over Ethernet cables, eliminating the need for separate power adapters or outlets. PoE switches are useful for deploying devices such as wireless access points, IP cameras, and VoIP phones in locations where power outlets are scarce or inconvenient. The FortiAP 431F is a wireless access point that supports PoE+ (IEEE 802.3at) standard, which can deliver up to 30W of power per port. The FortiAP 431F has a maximum power consumption of 25W when running at full power. Therefore, to run 12 FortiAP 431F devices at full power, the customer needs PoE switches that can provide at least 300W of total PoE power budget (25W x 12). The customer also needs network redundancy, which means that they need at least two PoE switches to connect the FortiAP devices in case one switch fails or loses power. From the FortiSwitch models and sample retail prices shown in the exhibit, the build of materials that has the lowest cost while fulfilling the customer’s requirements is 2x FortiSwitch 248E-FPOE. The FortiSwitch 248E-FPOE is a PoE switch that has 48 GE ports with PoE+ capability and a total PoE power budget of 370W. It also has 4x 10 GE SFP+ uplink ports for high-speed connectivity. The sample retail price of the FortiSwitch 248E-FPOE is $1,995, which means that two units will cost $3,990. This is the lowest cost among the other options that can meet the customer’s requirements. Option A is incorrect because the FortiSwitch 248EFPOE is a non-PoE switch that has no PoE capability or power budget. It cannot provide power to the FortiAP devices over Ethernet cables. Option B is incorrect because the FortiSwitch 224E-POE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Option D is incorrect because the FortiSwitch 124E-FPOE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Reference: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiSwitch_Secure_Access_Series.pdf https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiAP_400_Series.pdf

NEW QUESTION 28
Refer to the exhibit showing a FortiSOAR playbook.

You are investigating a suspicious e-mail alert on FortiSOAR, and after reviewing the executed playbook, you can see that it requires intervention.
What should be your next step?

Go to the Incident Response tasks dashboard and run the pending actions

Click on the notification icon on FortiSOAR GUI and run the pending input action

Run the Mark Drive by Download playbook action

Reply to the e-mail with the requested Playbook action

NEW QUESTION 29
Refer to the exhibit.

A customer has deployed a FortiGate 200F high-availability (HA) cluster that contains & TPM chip. The exhibit shows output from the FortiGate CLI session where the administrator enabled TPM.
Following these actions, the administrator immediately notices that both FortiGate high availability (HA) status and FortiManager status for the FortiGate are negatively impacted.
What are the two reasons for this behavior? (Choose two.)

The private-data-encryption key entered on the primary did not match the value that the TPM expected.

Configuration for TPM is not synchronized between FortiGate HA cluster members.

The FortiGate has not finished the auto-update process to synchronize the new configuration to FortiManager yet.

TPM functionality is not yet compatible with FortiGate HA D The administrator needs to manually enter the hex private data encryption key in FortiManager

NEW QUESTION 30
An administrator has configured a FortiGate device to authenticate SSL VPN users using digital certificates. A FortiAuthenticator is the certificate authority (CA) and the Online Certificate Status Protocol (OCSP) server.
Part of the FortiGate configuration is shown below:

Based on this configuration, which two statements are true? (Choose two.)

OCSP checks will always go to the configured FortiAuthenticator

The OCSP check of the certificate can be combined with a certificate revocation list.

OCSP certificate responses are never cached by the FortiGate.

If the OCSP server is unreachable, authentication will succeed if the certificate matches the CA.

NEW QUESTION 31
Refer to the exhibits.
The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

Use network-overlay id

Change advpn2 to IKEv1

Use local-id

Use peer-id

NEW QUESTION 32
Refer to the exhibit showing the history logs from a FortiMail device.

Which FortiMail email security feature can an administrator enable to treat these emails as spam?

DKIM validation in a session profile

Sender domain validation in a session profile

Impersonation analysis in an antispam profile

Soft fail SPF validation in an antispam profile

NEW QUESTION 33
Refer to the exhibit.

FortiManager is configured with the Jinja Script under CLI Templates shown in the exhibit.
Which two statements correctly describe the expected behavior when running this template? (Choose two.)

The Jinja template will automatically map the interface with “WAN” role on the managed FortiGate.

The template will work if you change the variable format to $(WAN).

The template will work if you change the variable format to {{ WAN }}.

The administrator must first manually map the interface for each device with a meta field.

The template will fail because this configuration can only be applied with a CLI or TCL script.

NEW QUESTION 34
Refer to the exhibit.

The exhibit shows the forensics analysis of an event detected by the FortiEDR core In this scenario, which statement is correct regarding the threat?

This is an exfiltration attack and has been stopped by FortiEDR.

This is an exfiltration attack and has not been stopped by FortiEDR

This is a ransomware attack and has not been stopped by FortiEDR.

This is a ransomware attack and has been stopped by FortiEDR

NEW QUESTION 35
An administrator has configured a FortiGate device to authenticate SSL VPN users using digital certificates. A FortiAuthenticator is the certificate authority (CA) and the Online Certificate Status Protocol (OCSP) server.
Part of the FortiGate configuration is shown below:

Based on this configuration, which two statements are true? (Choose two.)

OCSP checks will always go to the configured FortiAuthenticator

The OCSP check of the certificate can be combined with a certificate revocation list.

OCSP certificate responses are never cached by the FortiGate.

If the OCSP server is unreachable, authentication will succeed if the certificate matches the CA.

NEW QUESTION 36
Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.
Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

You can apply OSPF routing on the VDOM link in either PPP or Ethernet mode

Traffic on AccountVInk and SalesVInk will not be accelerated.

The VDOM links are in Ethernet mode because they have IP addressed assigned on both sides.

Root VDOM is an Admin type VDOM, while VDOM 1 and VDOM 2 are Traffic type VDOMs.

OSPF routing can be configured between VDOM 1 and Root VDOM without any configuration changes to AccountVInk

NEW QUESTION 37
Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

Report

FTP

API

SCP

NEW QUESTION 38
Refer to the exhibit.

You have deployed a security fabric with three FortiGate devices as shown in the exhibit. FGT_2 has the following configuration:

FGT_1 and FGT_3 are configured with the default setting. Which statement is true for the synchronization of fabric-objects?

Objects from the FortiGate FGT_2 will be synchronized to the upstream FortiGate.

Objects from the root FortiGate will only be synchronized to FGT__2.

Objects from the root FortiGate will not be synchronized to any downstream FortiGate.

Objects from the root FortiGate will only be synchronized to FGT_3.

NEW QUESTION 39
A remote worker requests access to an SSH server inside the network. You deployed a ZTNA Rule to their FortiClient. You need to follow the security requirements to inspect this traffic.
Which two statements are true regarding the requirements? (Choose two.)

FortiGate can perform SSH access proxy host-key validation.

You need to configure a FortiClient SSL-VPN tunnel to inspect the SSH traffic.

SSH traffic is tunneled between the client and the access proxy over HTTPS

Traffic is discarded as ZTNA does not support SSH connection rules

NEW QUESTION 40
Refer to the exhibits.

An administrator has configured a FortiGate and Forti Authenticator for two-factor authentication with FortiToken push notifications for their SSL VPN login. Upon initial review of the setup, the administrator has discovered that the customers can manually type in their two-factor code and authenticate but push notifications do not work Based on the information given in the exhibits, what must be done to fix this?

On FG-1 port1, the ftm access protocol must be enabled.

FAC-1 must have an internet routable IP address for push notifications.

On FG-1 CLI, the ftm-push server setting must point to 100.64.141.

On FAC-1, the FortiToken public IP setting must point to 100.64.1 41

NEW QUESTION 41
What is the benefit of using FortiGate NAC LAN Segments?

It provides support for multiple DHCP servers within the same VLAN.

It provides physical isolation without changing the IP address of hosts.

It provides support for IGMP snooping between hosts within the same VLAN

It allows for assignment of dynamic address objects matching NAC policy.

NEW QUESTION 42
What is the benefit of using FortiGate NAC LAN Segments?

It provides support for multiple DHCP servers within the same VLAN.

It provides physical isolation without changing the IP address of hosts.

It provides support for IGMP snooping between hosts within the same VLAN

It allows for assignment of dynamic address objects matching NAC policy.

NEW QUESTION 43
Refer to the exhibit.

A FortiWeb appliance is configured for load balancing web sessions to internal web servers. The Server Pool is configured as shown in the exhibit.
How will the sessions be load balanced between server 1 and server 2 during normal operation?

Server 1 will receive 25% of the sessions, Server 2 will receive 75% of the sessions

Server 1 will receive 20% of the sessions, Server 2 will receive 66.6% of the sessions

Server 1 will receive 33.3% of the sessions, Server 2 will receive 66 6% of the sessions

Server 1 will receive 0% of the sessions Server 2 will receive 100% of the sessions

NEW QUESTION 44
Refer to the exhibit.

A customer has deployed a FortiGate 200F high-availability (HA) cluster that contains & TPM chip. The exhibit shows output from the FortiGate CLI session where the administrator enabled TPM.
Following these actions, the administrator immediately notices that both FortiGate high availability (HA) status and FortiManager status for the FortiGate are negatively impacted.
What are the two reasons for this behavior? (Choose two.)

The private-data-encryption key entered on the primary did not match the value that the TPM expected.

Configuration for TPM is not synchronized between FortiGate HA cluster members.

The FortiGate has not finished the auto-update process to synchronize the new configuration to FortiManager yet.

TPM functionality is not yet compatible with FortiGate HA D The administrator needs to manually enter the hex private data encryption key in FortiManager

NEW QUESTION 45
Refer to the exhibit.

You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.
You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.
How should the initial connection be made?

Connect the switch on any interface between ports 21 to 24

Connect the switch on any interface between ports 25 to 28

Connect the switch on any interface between ports 1 to 4

Connect the switch on any interface between ports 5 to 8.

NEW QUESTION 46
A remote worker requests access to an SSH server inside the network. You deployed a ZTNA Rule to their FortiClient. You need to follow the security requirements to inspect this traffic.
Which two statements are true regarding the requirements? (Choose two.)

FortiGate can perform SSH access proxy host-key validation.

You need to configure a FortiClient SSL-VPN tunnel to inspect the SSH traffic.

SSH traffic is tunneled between the client and the access proxy over HTTPS

Traffic is discarded as ZTNA does not support SSH connection rules

NEW QUESTION 47
Refer to the exhibit.

To facilitate a large-scale deployment of SD-WAN/ADVPN with FortiGate devices, you are tasked with configuring the FortiGate devices to support injecting of IKE routes on the ADVPN shortcut tunnels.
Which three commands must be added or changed to the FortiGate spoke config vpn ipsec phasei-interface options referenced in the exhibit for the VPN interface to enable this capability? (Choose three.)

set net-device disable

set mode-cfg enable

set ike-version 1

set add-route enable

set mode-cfg-allow-client-selector enable

NEW QUESTION 48
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration. Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

NEW QUESTION 49
Which feature must you enable on the BGP neighbors to accomplish this goal?

Graceful-restart

Deterministic-med

Synchronization

Soft-reconfiguration

NEW QUESTION 50
A customer is planning on moving their secondary data center to a cloud-based laaS. They want to place all the Oracle-based systems Oracle Cloud, while the other systems will be on Microsoft Azure with ExpressRoute service to their main data center.
They have about 200 branches with two internet services as their only WAN connections. As a security consultant you are asked to design an architecture using Fortinet products with security, redundancy and performance as a priority.
Which two design options are true based on these requirements? (Choose two.)

Systems running on Azure will need to go through the main data center to access the services on Oracle Cloud.

Use FortiGate VM for IPSEC over ExpressRoute, as traffic is not encrypted by Azure.

Branch FortiGate devices must be configured as VPN clients for the branches’ internal network to be able to access Oracle services without using public IPs.

Two ExpressRoute services to the main data center are required to implement SD-WAN between a FortiGate VM in Azure and a FortiGate device at the data center edge

NEW QUESTION 51
Refer to the exhibit.

A FortiWeb appliance is configured for load balancing web sessions to internal web servers. The Server Pool is configured as shown in the exhibit.
How will the sessions be load balanced between server 1 and server 2 during normal operation?

Server 1 will receive 25% of the sessions, Server 2 will receive 75% of the sessions

Server 1 will receive 20% of the sessions, Server 2 will receive 66.6% of the sessions

Server 1 will receive 33.3% of the sessions, Server 2 will receive 66 6% of the sessions

Server 1 will receive 0% of the sessions Server 2 will receive 100% of the sessions

Pass Fortinet NSE8_812 Test Practice Test Questions Exam Dumps: https://www.vcedumps.com/NSE8_812-examcollection.html

Tags: new NSE8_812 test questions, NSE8_812 latest material, NSE8_812 latest test review, NSE8_812 reliable learning materials

Latest NSE8_812 Pass Guaranteed Exam Dumps with Accurate & Updated Questions [Q27-Q51]

Leave a Reply Cancel reply

NSE8_812 Practice Tests

Related Certifications

Recent Posts

Categories

Archives