[Jan 28, 2025] Prepare For The DC0-200 Question Papers In Advance [Q19-Q39]

NEW QUESTION 19
Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)

You must do a custom installation to support Linux.

The running kernel must have loadable module support enabled.

You must purchase the Linux version of OMSA.

The “ucd-snmp” or “net-snmp” package that is provided with the operating system must be installed.

You must be logged in as root.

NEW QUESTION 20
Why is memory interleaving used?

to provide speed improvements by accessing memory in parallel

to provide speed improvements by allowing addressing to be set for the next access to the same DIMM, while data are being read from the previous access

to provide redundancy by maintaining parity information on the DRAM to detect and correct single bit errors

to provide redundancy by allowing defective memory to be disabled

NEW QUESTION 21
What is required to enable a management application such as Dell OpenManage IT Assistant to receive SNMP traps from Dell OpenManage Server Agent/Server Administrator?

You configure the SNMP service on the computer on which OpenManage IT Assistant is running (the management station) to the correct read community name so thatit can read the traps correctly.

You configure the SNMP service trap destinations on the computer on which Dell OpenManage Server Administrator is running to send traps to the management station (where OpenManage IT Assistant is running).

You make sure OpenManage IT Assistant has discovered the managed node running Dell OpenManage Server Administrator.

Nothing needs to be done. OpenManage IT Assistant automatically registers to receive traps when it discovers the managed node on which Dell OpenManage Server Administrator is running.

NEW QUESTION 22
You are configuring multiple servers in a rack-dense environment and need the ability to easily control all of the servers from one management station within the rack. Which Dell racking component makes this possible?

PowerConnect switch

terminal emulator

console switch

flat panel monitor

NEW QUESTION 23
Which two operations can be performed with the DSA CD? (Choose two.)

run system diagnostics on your server

create NetWare 5.1/6.0 driver/utilities diskette(s)

change the Dell Service Tag via the Service Tag Utility

create Windows 2000 driver/utilities diskette(s)

NEW QUESTION 24
Which keystroke is used to designate a single disk as a Hot Spare drive in the LSI Logic PERC controller?

<F4>

<F10>

NEW QUESTION 25
You received an e-mail that states that a server has a warning on Fan 1. How can you determine the server status using Server Administrator? (Choose two.)

using telnet , log into the server and enter the status command to display the fan states

using OMSA, from the system tree find the fan that displays an exclamation point

using the Server Console, drill down to the fan to display the states

use an OMSA CLI command to display the status of Fan 1

NEW QUESTION 26
Click the Task button. Place in order the steps necessary to team adapters in a Microsoft Windows Environment.

NEW QUESTION 27
Which OpenManage component is installed on the managed system to allow SNMP alerts to be sent to the management station?

Server Assistant

IT Assistant

S erver Administrator

Remote Access Controller

NEW QUESTION 28
Which OpenManage component is the central repository for asset and inventory information?

Array Manager

Server Agent

DRAC II Web Console

IT Assistant

NEW QUESTION 29
Using Array Manager, which statement is true about reassigning the drive letter of your active volume (containing your boot disk)?

You mount a volume to your boot disk BEFORE reassigning a drive letter.

You can only change drive letters on volumes in extended partitions.

You cannot reassign the drive letter of your active volume.

You “Remove” the drive letter first, then “Add” a new drive letter.

NEW QUESTION 30
Which statement is true about using the Save feature of BASP?

It is used to install and configure the Broadcom Ethernet Controller driver.

It lets you transfer teaming configurations to other servers.

It is only available in Windows 2000.

It saves a configuration as an executable file.

NEW QUESTION 31
You select the RAID Configuration Utility from the Utility Partition menu. This takes you to the _____.

system setup

Array Manager

CERC BIOS

PERC BIOS

NEW QUESTION 32
What is the correct NIC teaming for the Intel Proprietary Method to accomplish load balancing?

SLB

AFT

ALB

ATF

NEW QUESTION 33
Which three pieces of information must you provide when using the Dell Server Assistant to install Windows 2000? (Choose three.)

hostname

time, date, and time zone

RAID level and virtual disk size

Dell serial number

NEW QUESTION 34
Which status is indicated for the server with the host name DC-AD?

System has a warning condition.

System is powered down; last known condition was warning.

System has a critical condition.

System is powered down; last known condition was healthy.

System has an unknown health condition.

System is healthy, but non-instrumented.

NEW QUESTION 35
How would you install Red Hat Linux and Dell-validated drivers for your factory-installed hardware using the Dell Server Assistant CD?

boot the Dell Server Assistant CD and have the Red Hat Linux CDs available

use the Dell Server Assistant CD to create a Utility Partition and launch the installation from the Utility Partition.

autorun the CD from the GUI after Red Hat Linux is installed

boot to the Dell Server Assistant CD after installing Red Hat Linux

NEW QUESTION 36
What is the correct NIC teaming for the Intel Proprietary Method to accomplish fault tolerance?

ATF

AFT

ALB

SLB

NEW QUESTION 37
A failed processor is removed on a quad processor system using slotted processors. The server displays video but the POST halts and displays a “processor or terminator card not installed” error. The removed processor was in the third slot. What is needed to allow the system to complete POST and boot the OS?

press F2 for system setup and disable processor 3 in the BIOS

install a terminator card in processor slot 3

install the ISA_CLR jumper, go through POST, power off, and remove the jumper

move the terminator card from processor slot 4 to processor slot 3

NEW QUESTION 38
You rename the administrator user name on a Windows Operating System to omsalogin and log in to OpenManage Server Administrator. Which two statements are true? (Choose two.)

Since you renamed the administrator name, its security ID is changed. Now you cannot log in to Server Administrator.

You can launch the Summary page of Server Administrator and view the Operating System and BIOS versions you have installed on your system.

Since you renamed the administrator user name, you can log in to Server Administrator as normal user, but not as an administrator.

You can update the BIOS on this system.

NEW QUESTION 39
What type of security authentication scheme is used by OMSA under Windows 2000?

NTLM

SNMP

NDS

PAM

[Jan 28, 2025] Prepare For The DC0-200 Question Papers In Advance [Q19-Q39]

Leave a Reply Cancel reply

DC0-200 Practice Tests

Related Certifications

Recent Posts

Categories

Archives