HPE6-A73 Sample Practice Exam Questions 2024 Updated Verified [Q41-Q59]

0 Comments

Rate this post

HPE6-A73 Sample Practice Exam Questions 2024 Updated Verified

Exam Study Guide Free Practice Test LAST UPDATED HPE6-A73

NO.41 A company requires access by all users guests, and employees to be authenticated Employees will be authenticated using 802 1X. whereas guests will be authenticated using captive portal Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?

 
 
 
 

NO.42 A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are automatically rediscovered by NetEdit and added back in.
What should the administrator do to solve this problem?

 
 
 
 

NO.43 Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:
Switch# show port-access role clearpass
Role information:
Name : icxarubadur_employee-3044-2
Type : clearpass
Status: failed, parsing_failed
Reauthentication Period :
Authentication Mode :
Session Timeout :
The downloadable user roles are not being downloaded to the AOS-CX switch. Based on the above output, what is the problem?

 
 
 
 

NO.44 The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)

 
 
 
 
 

NO.45 Examine the attached diagram.

The two PCs are located in VLAN 11 (10.1.11.0/24). Which example defines how to implement active gateway on the VSX core for VLAN 11?

 
 
 
 

NO.46 Examine the network topology.

The network is configured for OSPF with the following attributes:
* Core1 and Core2 and ABRs
* Area 1 has 20 networks in the 10.1.0.0/16 range
* Area 0 has 10 networks in the 10.0.0.0/16 range
* Area 2 has 50 networks in the 10.2.0.0/16 range
* The ASBR is importing a static route into Area 1
* Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:

Based on the above information, what is correct?

 
 
 
 

NO.47 Examine the configuration performed on newly deployed AOS-CX switches:

After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?

 
 
 
 

NO.48 A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches. The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes.
Which solution should the administrator implement?

 
 
 
 

NO.49 What is correct regarding rate limiting and egress queue shaping on AOS-CX switches’?

 
 
 
 

NO.50 An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as pnmary and secondary The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?

 
 
 
 

NO.51 A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA.
Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?

 
 
 
 

NO.52 An administrator will be deploying NetEdit to manage an Aruba solution. What does NetEdit support?

 
 
 
 

NO.53 What is true regarding VSX and keepalives on AOS-CX switches?

 
 
 
 

NO.54 What must a network administrator implement in order to run an NAE script on an AOS-CX switch?

 
 
 
 

NO.55 Which protocol does NetEdit use to discover devices in a subnet during the discovery process?

 
 
 
 

NO.56 A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS’CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?

 
 
 
 

NO.57 A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the gateways?

 
 
 
 

NO.58 Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:

The downloadable user roles are not being downloaded to the AOS-CX switch Based on the above output , what is the problem?

 
 
 
 

NO.59 An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSXcapabilities. The campus involves a core, as well as multiple access layers. Which feature should the administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?

 
 
 
 

The New HPE6-A73 2024 Updated Verified Study Guides & Best Courses: https://www.vcedumps.com/HPE6-A73-examcollection.html

Related Links: myportal.utt.edu.tt www.stes.tyc.edu.tw myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt


Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below