NEW QUESTION 77
Refer to the exhibit.

A high-availability setup for iSCSI is designed with the host running ISCSI software. Each storage port on the MDS exports the same two Fibre Channel target ports with different ISCSI target names. In this design, how many ISCSI session are created from the host so that recovery occurs if any component fails?

NEW QUESTION 78
A customer attaches an additional storage appliance to an existing Cisco UCS domain, which contains 50 virtualization hosts that require fabric failover connectivity on fabric interconnect B.
The interfaces are bound to a separate pin group to segregate traffic with a CoS value of 0.
Which Cisco UCS Manager feature meets these requirements?

NEW QUESTION 79
What is a design consideration when implementing FSPF?

NEW QUESTION 80
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server.
Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?

NEW QUESTION 81
Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

NEW QUESTION 82
Which automation software natively runs within the CLI of Cisco NX-OS devices?

NEW QUESTION 83
An engineer installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized.
Which two elements should be used in this environment? (Choose two.)

NEW QUESTION 84
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.

NEW QUESTION 85
A Cisco engineer is using a PowerShell script to create a service profile template on Cisco UCS Manager.
After defining the server pools and other templates, the engineer must ensure that the hosts are visible lo the northbound SAN network and storage initiators. Which configuration must be applied to enable this capability?

NEW QUESTION 86
An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used:
{prefix}.2019-01.com.acme123:00.ffd0cb21.bcb392817521
Which addressing scheme was used in the environment?

NEW QUESTION 87
Refer to the exhibit.

The security team created a new security policy that requires certain types of traffic to be subject to deep packet inspection The traffic types are
*internet traffic to application servers
*internet traffic to corporate users
*partner network traffic to application servers
*partner network traffic to corporate users
Where must the next-generation firewalls be inserted to implement the new policy?

NEW QUESTION 88
Refer to the exhibit. A Cisco engineer is configuring a PBR in a Cisco ACI data center scenario and plans to insert a transparent firewall. The APIC release is 4.1, the Cisco ACI fabric is configured to be the gateway for the servers and for the PBR node, and the Layer 4/ Layer 7 devices are deployed as Layer 1/ Layer 2 mode in the physical domain. Layer 1/Layer 2 PBR node interfaces are also configured to be in a bridge domain and not in an L3Out. What is required for the consumer and provider connectors of the Layer 1/Layer 2 device for this scenario to work?

NEW QUESTION 89
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?

NEW QUESTION 90
The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection. A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:
The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.
The ITD service is provided for inside and outside segments of the firewall.
Which ITD deployment mode must be implemented to meet these requirements?

NEW QUESTION 91
A data center uses Cisco Nexus 7000 Series Switch and contains two tenants, tenant A and tenant B.
* Tenant A uses IP addresses in the 10.2.30.41/24 to 10.2.30.64/24 range.
* Tenant B uses IP addresses in the 10.2.30.120/24 to 10.2.30.192/24 range.
The engineer must implement a solution that
* Isolates the traffic for each tenant as separate routing data and control planes.
* Physically partitions the Cisco Nexus device into separate multiple logical devices with separate management, failure domain isolation, and resource management.
Which two technologies meet these requirements? (Choose two.)

NEW QUESTION 92
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?