ANVE Exam Dumps – Try Best ANVE Exam Questions from Training Expert VCEDumps [Q46-Q61]

Q46. The first time an Axis camera’s Live View is accessed the user is prompted to do which of the following?

Configure a root password

Select a resolution

Enter a camera name

Assign IP address

Q47. When viewing live Motion JPEG video from an Axis camera, if the image looks pixilated with no digital zoom, which of the following settings would best address the issue?

Adjusting the Group of Video (GOV) length from 32 to 4

Increasing color saturation

Adjusting the image contrast

Decreasing the image compression

Q48. How can existing coaxial cable be leveraged when installing network cameras?

They can be used but are normally in bad shape, making them futile to use

They are excellent for power transmission

By using a media converter

Coax cannot be leveraged for network cameras

Q49. Looking at the picture below, which setting would best address the blurring that’s occurring with faster moving objects?

Increase image brightness

Adjust the exposure settings

Uncheck backlight compensation

Increase image contrast

Q50. IP51 and IP52 means that the camera

Can be placed in or outdoors.

Is resistant to dust and dripping water.

Is vandal resistant.

Is designed for tough environments.

Q51. A VPN

Is required to enable viewing network surveillance video on mobile devices.

Is a network specially optimized to handle video data packets.

Creates a secure tunnel through the network, where your information travels encrypted.

Translates domain names to IP addresses, according to the IPv4 standard.

Q52. Audio detection can be used

Only with cameras with built in microphone.

In all Axis cameras but an extra intelligent video (IV) module is necessary.

Only in quiet areas.

For detecting a change in decibel levels.

Q53. Which setting would best adjust a hard yellow tint as shown in the pictures below?

Image contrast

White balance

Color saturation

Image brightness

Q54. Which of the following conditions has to be met to use multicast streaming?

The network infrastructure has to support multicast

The client has to run AXIS Camera Management or AXIS Camera Station

The client has to support streaming over RTSP

The video device needs to run on firmware version 5.20 or higher

Q55. Gatekeeper is a function that

Makes it possible for a PTZ camera to do a guard tour.

Enables two way audio for communication at a gate.

Uses video motion detection for detecting if a gate is open.

Uses video motion to zoom in on an object.

Q56. Incorrect colors due to faulty calibration or configuration may result in

False representation of video footage.

Limiting the possibility of sufficient pixel density for facial recognition.

Increasing bandwidth due to high levels of noise.

The camera automatically switching to black and white mode.

Q57. Increase of bandwidth and storage can be a result of (Choose two)

Changing from Motion JPEG to H.264.

Arctic Temperature Control.

High noise level.

The use of High PoE.

Image resolution.

Q58. If a surveillance camera is installed in an environment with fluorescent lighting, which effect may this have on the video quality?

Increased color saturation

Flickering effects on video

Increased random noise

Motion blur on moving objects

Q59. Which is the main advantage of Axis P-iris technology?

It improves low light performance

It reduces purple fringing

It limits motion blur

It optimizes the aperture, limiting artifacts

Q60. How can using PoE to power cameras help keep them running during a power outage?

PoE cameras use less cabling, allowing backup power supplies to last longer

PoE cameras are centrally powered from the Ethernet switches which are backed up by uninterrupted power supply (UPS)

The PoE standard requires connected devices to include backup batteries, to allow for network dropouts

Since PoE cameras are centrally powered by the server, you will only need to add backup power to the server to keep the system running

Q61. When initiating a surveillance project with a customer, which of the following should be considered first?

Understand which camera models to use

Understand the customer’s technical knowledge

Understand the customer’s goals and requirements

Understand the legal aspects for the installation

ANVE Exam Dumps – Try Best ANVE Exam Questions from Training Expert VCEDumps [Q46-Q61]

Leave a Reply Cancel reply

ANVE Practice Tests

Related Certifications

Recent Posts

Categories

Archives