Q89. Refer to the exhibit. A network engineer must configure a Cisco ACI fabric for the External Bridged network to communicate with L3Out. Which action accomplishes this goal?

Q90. All workloads in VLAN 1001 have been migrated into EPG-1001. The requirement is to move the gateway address for VLAN 1001 from the core outside the Cisco ACI fabric into the Cisco ACI fabric. The endpoints in EPG-1001 must route traffic to endpoints in other EPGs and minimize flooded traffic in the fabric. Which configuration set is needed on the bridge domain to meet these requirements?

Q91. An engineer must deploy Cisco ACI across 10 geographically separated data centers. Which ACI site deployment feature enables the engineer to control which bridge domains contain Layer 2 flooding?

Q92. What is a characteristic of a Cisco ACI Multi-Site?

Q93. The existing network and ACI fabric have been connected to support workload migration. Servers will physically terminate at the Cisco ACI, but their gateway must stay in the existing network. The solution needs to adhere to Cisco’s best practices. The engineer started configuring the relevant Bridge Domain and needs to complete the configuration. Which group of settings are required to meet these requirements?

Q94. An engineer must implement management policy and data plane separation in the Cisco ACI fabric. Which ACI object must be created in Cisco APIC to accomplish this goal?

Q95. An engineer needs to deploy a leaf access port policy group in ACI Fabric to support the following requirements:
* Control the amount of application data flowing into the system
* Allow the newly connected device to auto-negotiate link speed with the leaf switch Which two ACI policies must be configured to achieve these requirements? (Choose two.)

Q96. A data center administrator is upgrading an ACI fabric. There are 3 APIC controllers in the fabric and all the servers are dual-homed to pairs of leaf switches configured in VPC mode. How should the fabric be upgraded to minimize possible traffic impact during the upgrade?

Q97. When configuring Cisco ACI VMM domain integration with VMware vCenter, which object is created in vCenter?

Q98. An engineer must add new servers to a Cisco ACI cluster and configure ports to accept the new servers. The existing servers are dual-homed to Leaf101 and Leaf102 using ports 1-3 and an interface policy group called cluster1_ifpg. The new servers must use ports 1 and 2 on Leaf103 and Leaf104. Which two actions must be taken to enable the ports with the same configuration as the existing servers in the cluster? (Choose two.)

Q99. Which role do interfaces Ethernet 1/49-50 have in this output?

Q100. An engineer must connect a new host to port 101 on Leaf 101. A Cisco ACI fabric has an MOP policy configured but experience excessive Layer 2 loops The engineer wants the Cisco ACI fabric to detect and prevent Layer 2 loops m the fabric Which set of actions accomplishes these goals’?

Q101. Refer to the exhibit. Which action should be taken to ensure authentication if the RADIUS servers are unavailable?

Q102. Out of the following switches, which are spine platforms that support ACI Multi-Site? (Choose two.)

Q103. Refer to the exhibit. A Cisco APIC raises this fault when connectivity for EPG-3 is configured.
Which action clears the fault?

Q104. Engineer must configure SNMP inside a Cisco ACI fabric. The engineer has created an SNMP Policy, called SNMP-policy and an SNMP Monitoring Group called SNMP-group1 that Contains five trap receivers. Which configuration set completes the configuration?

Q105. When creating a subnet within a bridge domain, which configuration option is used to specify the network visibility of the subnet?

Q106. Which two protocols are used for fabric discovery in ACI? (Choose two.)

Q107. An engineer is configuring a VRF for a tenant named Cisco. Drag and drop the child objects on the left onto the correct containers on the right for this configuration.

Q108. Refer to the exhibit.

Refer to the exhibit. An engineer must divert the traffic between VM-1 and VM-2 by using a Multi-Node service graph. The solution should prevent an insufficient number of available Layer 4 to Layer 7 devices in the first cluster. Which configuration set accomplishes this goal?